您的瀏覽器版本已過時。我們建議您更新瀏覽器到最新版本。

Steam Sterilizer 

Purpose:

The steam sterilizer is a highly safe sterilizing product with stable function, suitable for major hospitals, clinics and biochemical research laboratories etc., for the sterilization of instrument, cloth, glassware and liquid etc.

Designed of double-layers with inner and outer chamber for good drying efficiency, and totally made of stainless steel 304 # (316 # is optional). The outer layer uses thermal insulation wool for heat preservation, and then covered with 304 #stainless steel sheet for both functions of aesthetic appearance and heat preservation.

Stainless steel door with radial lever can effectively lock tight the door cover and prevent steam leakage.

Silicone door gasket is high- temperature resistant, durable, and without deformation.

The chamber body is supported by a stainless steel support, and the height of level can be adjusted from the adjustable footpad of support base.

 

Practical Sterilization Function:
1. Preset Vacuum Function is able to shorten the sterilization time.
2. Vacuum drying function is able to remove unwanted moisture quickly, and to reach the Bowie Dick test criteria.
3. Cloth / apparatus glass / liquid, Sterilization Functional Switch Mode can be selected to switch according to different                   kinds of materials to be sterilized. When liquid sterilization, make sure liquid ingredient to avoid rust and corrosion                     occurred. For medicalt & chemical ingredient, physiological salt water etc. pls select stainless steel #316
4. Auto Water Supply Device: Electrical control system is able to detect and sense the water volume automatically.                           Upon insufficient water volume, it will supply to high water level automatically. 

Use equipment for soft water purification can prolong the life cycle of sterilizer.

 

Safety Devices:
1. Auto Power-Off Protection Device for water shortage, when water runs out, the electrical control system will                                 automatically cut off the heating power to prevent heating device from overheating, dry-out or even meltdown. 
2. Pressure Controller, the maximum pressure in the boiler is limited to 2.2 ± 0.1kg/cm ². When the pressure reaches the               set value, the heating power will be automatically off to prevent the pressure from rising.
3. Safety Valve, when the pressure reaches 2.5kg/cm ², it will start a rapid exhaust of steam and release the pressure from
    the chamber .
4. Pressure Lock, when the pressure of inner chamber exceeds 0.2kg/cm ², the clutch will be locked automatically, and the
    door cover will not be able to open, in order to keep the operator safe.
5. Safety Switch of Door Cover, when the door cover opened, the steam in the outer chamber is unable to enter the inner
    chamber. It cannot be operated normally unless the door cover is closed tightly.

 

Simple Operation Interface:
1. Digital LED electronic timer is able to control the working hours of sterilization and drying precisely within the range of
    0~99 minutes.
2. Digital LED electronic temperature controller is able to set the required working temperature quickly, and show the                   current temperature status of inner chamber. The highest setting temperature is 134°C (218.47 F°)
3. The pressure gauge of inner and outer chamber is able to clearly show the current working temperature status of                       interior of sterilizer.
4. The open and close of turning type door cover is easy for operation.

The highest sterilization temperature is 134°C(218.47 F°), and the pressure value for sterilization is able to reach 2.2kg/cm²
(2.16 bar or 31.29psi).

Heating device with high power will take 20 minutes to complete sterilization under 121°C, or 15 minutes under 132°C.

 

The preparation steps for sterilization function shown as following: 

 Manual operation-

put the items to be sterilized inside, and close the door cover► supply water manually ► set time ► turn on the power ► heating ► sterilization time completed ► exhaust steam manually ► set drying time ► completion

 

Automatic operation-

put the items to be sterilized inside, and close the door cover► set temperature/time► turn on the power/activate the switch► supply water manually► heating ► sterilizing► steam exhaust for inner chamber ► drying► completion

 

Fully-automatic operation-

put the items to be sterilized inside, and close the door cover► set temperature/time► turn on the power/activate the switch► supply water automatically► heating ►preset vacuum for 3 times ► sterilizing► steam exhaust for inner chamber ► vacuum drying► completion

 

 Functions \ Operating system Manual Fully automatic

Fully automaticadd vacuum drying

Steam exhaust valve outer chamber Yes Yes Yes
 Dry function  Manual   Auto  Auto
 Sterilizeation function  Manual   Auto   Auto
 Thermometer, unner chamber  Yes  N/A  N/A
 Temperature controller  N/A  Yes  Yes
 Timer  60Minutes x 1pcs 90Minutes x 2pcs   99Minutes x 2pcs
 Safety valve  1pcs  1pcs  1pcs
 Pre-heating function  Yes  Yes  Yes
 Auto water filling  Optional  Optional  Yes
 Vacuum drying (Pre-vacuum)  N/A  N/A  Yes
 Glass & liauid sterilization function  N/A Optional  Yes
 Low water indiction / cut-off  Yes Yes Yes
 Water Level Control & Protection  Yes Yes  Yes
 Safety door lock activated by pressure  Optional  Optional  Optional
 Chamber material stainless steel #316 (satndar #304)  Optional  Optional  Optional
 Transportation cart  Optional  Optional  Optional
 Stainless steel tray  1pcs  1pcs  1pcs

 

Model

External DIA
L.W.H.(cm)

Chamber
ΦxD(cm)

Capacity
(Liter)

Power
Consumption(Kw)

Max
Sterilization
Temperature(°C)

Operate
Pressure
(kg/cm²)

N.W.
(Kg)

 TC-615  204x76x175  60x150 424  24  134±2  2.2±0.1  360
 TC-612  174x76x175 60x120 339  18  134±2  2.2±0.1  321
 TC-600  154x76x175  60x100 283  12  134±2  2.2±0.1 285 
 TC-500  135x66x169  50x100 196  10  134±2  2.2±0.1  265
 TC-459  117x61x163 45x90 143  7  134±2  2.2±0.1 197 
 TC-409  117x56x160 40x90 113  6  134±2  2.2±0.1 140 
 TC-407  104x56x160 40x75  94  6  134±2  2.2±0.1  125
 TC-406  93x56x160 40x66 83  6  134±2  2.2±0.1  115
 TC-339  117x48x148 33x90 77  5  134±2  2.2±0.1  110
 TC-336  93x48x148 33x66 56  4  134±2  2.2±0.1  97